W38L System
The W38L linkage wiper system is the perfect solution when you want to make sure the wipers will cover as much of your windscreen as possible, using two overlapping sweeps.
The system powers two arms with a 610 mm / 560 mm arm/blade combination.
- 38 Nm torque
- Powers up to 610 mm / 560 mm arms and blades
- Adjustable sweep angle: 45 – 110°
- Enables overlapping sweep
- Dynamic parking, left or right
- Two-speed: slow 35 sweeps/min; fast 55 sweeps/min
- Voltage Input: 12 or 24 VDC
- EMC-protected
- Insulated ground for metal, GRP, and wooden boats
- Pantograph or pendulum arms
- Driveshaft in stainless steel
- Total: 8
-
W38L Linked Windscreen Wiper motor
A linked wiper system where one motor runs two W12 wiper arms. With this system, you can design a very efficient wiper system with an overlapping sweep.
-
Extension tube
Extension tube in stainless steel for the W38L boat windshield wiper system. CC-measure 450-750 mm.
-
Pantograph arm, slim
This is a slim stainless steel pantograph arm with a J-hook connection. The slim design enables higher visibility. The wiper arm fits our wiper motors W10, W12, and W38L.
-
Threaded rod M8 - Wiper linkage system
The threaded rod in stainless steel is the link between the two shafts in our W38L boat windshield wiper system.
-
Wiper blade
A windshield wiper blade in natural rubber and stainless steel with anti-glare painting. Suitable for ROCA wiper arms with a saddle width of 16 mm.
-
Wiper blade zinc-plated steel
A wiper blade made of black painted zinc-plated steel. Natural rubber profile with stainless steel backer. Two adaptors to fit wiper arms with a straight connection or J-hook connection.
- Total: 8
