W10 Wiper motor
A robust yet slim windshield wiper motor for indoor mounting on boats and other vehicles. The W10 wiper motor has two speeds and offers an easily adjustable eight-step sweep angle.
Specification:
- 10 Nm torque
- Self-parking - left or right
- Easily adjustable sweep angles: 40°, 50°, 60°, 70°, 80°, 90°, 100°, and 110°
- Two speeds: slow 35 sweeps/min and fast 55 sweeps/min
- 12 or 24 VDC
- EMC protected
- Driveshaft in stainless steel
- Insulated ground for metal, plastic, and wooden boats
- Powers up to 610 mm / 560 mm /24" x 22" arm/blade combinations
Products
Instructions for wiper motor W10
Extra information
| Current diagram | 12V | 24V |
| No load | < 2 A | < 1 A |
| Rated | < 4 A | < 2 A |
| Stall | < 10 A | < 5 A |
| Fuse /fast blow) | 5 A | 3 A |
| Speed no load | (35 /55 RPM) |
Accessories
-
Wiper arm - standard
A black windshield wiper arm in stainless steel for the wiper motors W10 and W12.
-
Pantograph arm, slim
This is a slim stainless steel pantograph arm with a J-hook connection. The slim design enables higher visibility. The wiper arm fits our wiper motors W10, W12, and W38L.
-
Wiper arm with adjustable tip
Wiper arm with an adjustable tip for our wiper systems W10 and W12. Available in black or electropolished stainless steel.
-
Wiper blade
A windshield wiper blade in natural rubber and stainless steel with anti-glare painting. Suitable for ROCA wiper arms with a saddle width of 16 mm.
-
Wiper blade zinc-plated steel
A wiper blade made of black painted zinc-plated steel. Natural rubber profile with stainless steel backer. Two adaptors to fit wiper arms with a straight connection or J-hook connection.
Suggested products
-
W10 & W12 Spray kit for arms
A spray kit for mounting on wiper arms within our wiper motor systems W10 and W12. The kit includes a 1 100 mm tube.
-
Wiper control for 1 motor
Small and reliable wiper control for 1 wiper motor that can be used with all ROCA wipers. The control is supplied with switch and cable. All functions can be operated with the single switch.
-
Wiper control for 1-3 motors
With this small and reliable wiper control box, you can now master up to 3 W10 or W12 wiper motors. The wiper control box gives you full control of your wiper system and includes interval, synchronized sweep, and flushing integration.
-
CT41 Wiper control
A user-friendly all-in-one wiper control system for one low-power wiper motor. No additional relay boxes are needed, which makes the CT41 wiper control really easy to install.
-
Solenoid for washer systems
Flush the windshield from debris or salt with fresh water. This solenoid for washer systems is used instead of a separate tank in a wiper system.
-
Tank set with pump
This tank set with a 2.5-liter tank with a pump completes your washer system for windshield wipers.
