W38L Linked Windscreen Wiper motor
A linked wiper system where one motor runs two W12 wiper arms. With this system, you can design a very efficient wiper system with an overlapping sweep.
The W38L linked wiper system is designed for heavy-duty applications.
- Torque 38Nm torque
- Powers up to 610 mm / 560 mm arms and blades
- Easily adjusted sweep angle 45 - 110° for maximum visibility
- Possible to have an overlapping sweep
- Dynamic parking can be changed from Left to Right
- Two speeds: 35 sweeps/min and 55 sweeps/min
- Voltage Input: 12 or 24VDC
- EMC protected
- Insulated ground for metal, GRP, and wooden boats
- Pantograph or pendulum arms
IMPORTANT:
When mounting a parallel arm in a linked W38L system the Plate and shaft W38L are needed and must be ordered separately.
Products
Documents
Extra information
- L3 = 160 - 450 (750) mm* *) With extension tube
- L4 = L3 - 100 mm
- A1 = 45 - 110°
- A2 = 10 - 110°
Accessories
-
Extension tube
Extension tube in stainless steel for the W38L boat windshield wiper system. CC-measure 450-750 mm.
-
Threaded rod M8 - Wiper linkage system
The threaded rod in stainless steel is the link between the two shafts in our W38L boat windshield wiper system.
Suggested products
-
Pantograph arm, slim
This is a slim stainless steel pantograph arm with a J-hook connection. The slim design enables higher visibility. The wiper arm fits our wiper motors W10, W12, and W38L.
-
Wiper arm - standard
A black windshield wiper arm in stainless steel for the wiper motors W10 and W12.
-
Wiper arm with adjustable tip
Wiper arm with an adjustable tip for our wiper systems W10 and W12. Available in black or electropolished stainless steel.
-
W10 & W12 Spray kit for arms
A spray kit for mounting on wiper arms within our wiper motor systems W10 and W12. The kit includes a 1 100 mm tube.
-
Wiper control for 1 motor
Small and reliable wiper control for 1 wiper motor that can be used with all ROCA wipers. The control is supplied with switch and cable. All functions can be operated with the single switch.