RG-502 Aluminum profile
A split aluminum profile for floor- or vertical mounting in interior glass walls, with or without doors. Available in different lengths and surface treatments.
- The RG-502 is a split profile for easy installation
- The RG-503 is a fixed profile for ceiling use
Using a fixed or split profile depends on the ability to slide the glass laterally during installation. Usually, a fixed profile is attached to the ceiling and split on the floor and vertically.
The edgy design of the profile allows you to combine the aluminum profiles at 90°.
The profiles are sold in 3,000 mm and 6,000 mm lengths, supplied with end cap RG-512, rubber gasket base RG-520, and wedge gasket for selected glass thickness (8 - 12,76 mm) RG-521.
If you need a higher profile, these profiles can also be combined with the wall-, ceiling- and floor profile RG-504.
Products
Documents
Drift och underhållsinstruktion (DU) för väggprofiler
Maintenance wall and frame system
Extra information
Accessories
-
RG-520 Base gasket
A base rubber gasket to be mounted inside our aluminum profiles RG-501 - 510 and the RG-580 Decibel aluminum frames for a safe and steady glass wall installation.
-
RG-521 Wedge gasket
A wedge gasket in sturdy rubber for our glass wall aluminum profile systems RG-501 - RG-510, and RG-580 Decibel aluminum frame. The wedge gasket is applied between the glass and the aluminum profile to secure and stabilize the glass.
Suggested products
-
RG-506 Glazing blocks
A practical spacer in durable plastic, for protecting the glass panes when mounting glass wall partitions.
-
RG-512 Endplate
A double-sided cover for the RG-502 and RG-503 aluminum profiles. The endplate gives a complete and elegant finish to a doorway by concealing the ends of the aluminum profiles.
-
RG-503 Glass wall profile
A fixed aluminum profile for ceiling mounting interior glass walls with or without doors. The glass wall profile is available in different lengths.
